My Mad Scientist Lab

This is my mad scientist lab that I am putting together. So far, I have been able to acquire the following equipment:

Routers

Cisco 2501 Router

• 1 Ethernet/IEEE 802.3 interface(s)

• 2 Serial network interface(s)

• 32K bytes of non-volatile configuration memory.

• 8192K bytes of processor board System flash (Read ONLY)

• Cisco IOS (tm) 2500 Software (C2500-INS-L), Version 12.0(21a), RELEASE SOFTWARE (fc1)

Two Cisco 2501 Routers

• 1 Ethernet/IEEE 802.3 interface(s)

• 2 Serial network interface(s)

• 32K bytes of non-volatile configuration memory.

• 8192K bytes of processor board System flash (Read ONLY)

• Cisco IOS (tm) 2500 Software (C2500-IS56-L), Version 11.2(16), RELEASE SOFTWARE (fc1)

Two Cisco 2611 Routers

• 2 Ethernet/IEEE 802.3 interface(s)

• 2 Serial(sync/async) network interface(s) - WIC-2T Serial Module Card

• 32K bytes of non-volatile configuration memory.

• 16384K bytes of processor board System flash (Read/Write)

• Cisco IOS (tm) C2600 Software (C2600-IK8O3S-M), Version 12.2(11)T,  RELEASE SOFTWARE (fc1)

Cisco 2620XM Router

• 2 FastEthernet interfaces

• 4 Low-speed serial(sync/async) interfaces - NM-4A/S Serial Module Card

• 32K bytes of NVRAM.

• 49152K bytes of processor board System flash (Read/Write)

• CallManager Express

• Security Device Manager (SDM) 2.5 installed

• Cisco IOS Software, C2600 Software (C2600-ADVENTERPRISEK9-M), Version 12.4(9)T, RELEASE SOFTWARE (fc1)

Cisco 2621XM Router

• 2 FastEthernet interfaces

• 2 Serial(sync/async) interfaces - WIC-2T Serial Module Card

• 32K bytes of NVRAM.

• 32768K bytes of processor board System flash (Read/Write)

• Cisco IOS Software, C2600 Software (C2600-ADVENTERPRISEK9-M), Version 12.4(9)T,

• RELEASE SOFTWARE (fc1)

Cisco 2811 Router

• 2 FastEthernet interfaces

• 1 Virtual Private Network (VPN) Module

• DRAM configuration is 64 bits wide with parity enabled

• 239K bytes of non-volatile configuration memory

• 500472K bytes of ATA CompactFlash (Read/Write)

• Cisco IOS Software, 2800 Software (C2800NM-ADVENTERPRISEK9-M), Version 15.1(4)M6

• CallManager Express (CME) 8.6

• Cisco Configuration Professional (CCP) 2.7

Switches

Cisco WS-C2916M-XL

• 16 Ethernet/IEEE 802.3 interface(s)

• 32K bytes of flash-simulated non-volatile configuration memory.

• Cisco IOS (tm) C2900XL Software (C2900XL-H-M), Version 11.2(8)SA3, RELEASE SOFTWARE (fc1)

Two Cisco 2950

• 24 FastEthernet/IEEE 802.3 interface(s)

• 32K bytes of flash-simulated non-volatile configuration memory.

• c3550-ipservicesk9-mz.122-50.SE1.bin

• Cisco IOS (tm) C2950 Software (C2950-I6K2L2Q4-M), Version 12.1(22)EA14, RELEASE SOFTWARE (fc1)

Cisco WS-C3550-24

• 24 FastEthernet interfaces

• 2 Gigabit Ethernet interfaces

• Running Layer2/3 Switching Image

• c3550-ipservicesk9-mz.122-50.SE1.bin

• Cisco IOS Software, C3550 Software (C3550-IPSERVICESK9-M), Version 12.2(50)SE1, RELEASE SOFTWARE (fc2)

The 2500 routers and the 2916 switch I bought way back in 2001. The newer routers and switches I bought last month (August 2013).

The boxes on the top are servers that I am in the process of putting together - a 1u rackmount server and a 2u rackmount server. More on those later ....

 Guess I need to think about getting a new rack while I'm at it.